＊Only available to students of Suikoushya International Craft School.
＊You can buy it in cash.
＊ Please purchase the grindstone, steel plate, and diamond plate directly from the link. It cannot be purchased at school.
＊You need a tool with red letters. Be sure to bring it with you or buy it if you don’t have one.
1; Nomi
- Tsukinomi 24㎜ ——- 80€
- Tatakinomi 24mm ——69€
- Tatakinomi 12㎜ – ——58€
- Tatakinomi 6mm – ——58€
2; Sashigane
- traditional type(寸sun) —— 33€
- mm type – ——33€
3; Try square – —-14€
4; Bevel Gauge ——- 14€
5; straight edge —— 80€
6; Ryouba saw 240㎜ ——- 54€
7; Sumitsubo ——- 65€
8; Kanna 48㎜ ——-136€
9; Kanna blade for make dai （Please select and purchase one Kanna blade of the size you want to make.）
- Kanna balde 70mm for make Dai ——- 120€
- Kanna balde 65mm for make Dai ——— 118€
- Kanna balde 60mm for make Dai ——— 117€
- Kanna balde 54mm for make Dai ——— 108€
- Kanna balde 48mm for make Dai ——-77€
- Kanna balde 42mm for make Dai ——-75€
- Kanna balde 36mm for make Dai ——73€
10; Chipbreaker for make dai （Choose and buy one tip breaker that matches the canna blade of your choice.）
- Chip breaker 60mm~70mm for make Dai ——-22€
- Chip breaker 36mm~54mm for make Dai ———15€
11; Ryoukuchi Genno (Middle size 420g) ——-26€
12; Katakuchi Genno (Small size:335g) ——— 19€
13; Sagariwauchi ——— 24€
————————————————————————————————————————————-
1;Nomi(Chisels)
Tsukinomi 24㎜ ——-80€
Tatakinomi 24mm ———69€
Tatakinomi 12㎜ ——— 58€
Tatakinomi 6mm ———58€
Setting a Japanese Chisel (Nomi)
Using Nomi (Japanese chisel) to make a dovetail joint
Sashigane ——33€
traditional type(寸sun)
mm type
Using Sashigane
Try square ——-14€
Bevel Gauge ——- 14€
straight edge ——— 80€
Ryouba saw 240㎜ ———54€
How to accurately mark and saw lines
Sumitsubo ——— 65€
Kanna 48㎜ ——— 136€
How to set up a new Kanna (Japanese Hand Plane)
Kanna balde 70mm for make Dai ———120€
(Front side) ( Back side )
Chip breaker for make Dai ———22€
Ryoukuchi Genno (Middle size 420g) ———26€
Katakuchi Genno (Small size:335g) ———19€
Sagariwauchi ———24€
